Extension the electrode life application method

Cannot weld the electrode absolutely

  To depend on is spatially the contact resistance eliminates the paint, belongs to the extremely precise part, welds spatially one time, the electrode life has reduces a half possibility.Welds spatially the meaning is when an object which the electrode acme has not contacted other to be possible to transfer heat has the flame, does not pay attention in the situation is often trading the electrode, rubs the electrode, lifts time appearance which the electrode clamps, therefore must pay attention extremely, carries on the time tight summary which above operates to turn off light the source.

The parameter cannot excessively be high for Specially new electrode

  new electrode if uses the big parameter from the very beginning, so long as hits a time fire to be able to change and the old electrode is not equally easy to use, the truth and welds is spatially same.Therefore each only new electrode as far as possible must move the time below 12MS, the voltage adjusts below 0.90V to start to try to weld, again adjusts the high voltage according to the effect.

  Electrode if uses the big parameter from the very beginning, so long as hits a time fire to be able to change and the old electrode is not equally easy to use, the truth and welds is spatially same.Therefore each only new electrode as far as possible must move the time below 12MS, the voltage adjusts below 0.90V to start to try to weld, again adjusts the high voltage according to the effect.

   Various companies must aim at the product situation which at present welds, we suggested the time did not need to adjust generally about 10-12MS, the new electrode tried welded when the parameter to move about 0.80-0.90V, welded is unreliable again the voltage progressive enlarge, the time and the pressure all needs to change frequently, the pressure in 8-22OZ all might.

Rubs the electrode the method

  Electrode welding unreliable or the time which tapes, first should rubs the electrode, but adjusts the high parameter, rubs the electrode time must pay attention cannot use the too big strength to rub, so long as had to use to repair the microsection or the W5 thin sandpaper comes to rub 12 electrode bases cleanly clean to be possible lightly.

The electrode do not have among the loose

 Electrode to be frequently the insulating compound, the important electrode loosens again can affect the acme two side electrodes the contact positions, causes the welding effect not to be very good, therefore suggested intensely, the electrode will install later to use the electrode not to be able continuously to use up to only then to take, the midway do not have to disassemble the electrode frequently.

The electrode clamps the clamp place to want cleanly clean

  Because welds uses is the big electric current, must hit the very big parameter frequently the reason is because the electrode clamps the clamp electrode the place dirt to be very many, affected the electric current to flow seriously.Therefore suggested each month wants the clean clean this spot.

Must appear not not good

   To the line generally is correctly because does not permit to the line to create, has two main points to the line, one is the line must pass through nearby electrode bottom end two, two is the time which looked has the error, must press the line in the electrode bottom end middle position, but looks like time is presses the line behind the electrode the place.

Each electrode all has the difference, cannot use the similar parameter

  Electrode is extremely frail and the precise product, when exwork has a standard scope, but is dissimilar as a result of the different machine connection effect, the different product surface oxidation degree is dissimilar, the electrode laying aside time oxidizes the degree not to be dissimilar differently, simultaneously, each electrode common difference is dissimilar, although all in qualified scope, but as a result of the spot effect and the machine, the connection effect, the face of weld oxidation degree, to the line situation, dynamics which the foot steps on and so on many kinds of factors is related, therefore each electrode  should correspond the parameter hasThe difference, strict says does not have the means to achieve has the completely same welding effect two electrodes, but so long as the parameter is appropriate, the welding effect all is not big in a scope or the difference.Only then defers to above request to do, and can let the electrode welding effect be very good achieves the longest service life.